• Heat Guns for Shrink Wrap (WL1200F-902)
  • Heat Guns for Shrink Wrap (WL1200F-902)
  • Heat Guns for Shrink Wrap (WL1200F-902)
  • Heat Guns for Shrink Wrap (WL1200F-902)
  • Heat Guns for Shrink Wrap (WL1200F-902)
  • Heat Guns for Shrink Wrap (WL1200F-902)

Heat Guns for Shrink Wrap (WL1200F-902)

Type: Induction Heating Machine
Certification: CE
Structure: Desk Type
Brand: Crown
Model: Wl1200f-902
Hot Air Exit: 10~90mm Adjustable (Square)
Customization:
Diamond Member Since 2020

Suppliers with verified business licenses

Manufacturer/Factory

Basic Info.

Model NO.
WL1200F-902
Maximum Heating Width
<90mm
Tuyere Distance
10mm~120mm Tunable
Hair Drier
200W
Maximum Wind Volume
380m3/H Air Volume Adjustable
Temp Accuracy
Digital Adjustment, Accuracy of+1 Degree
Temperature Range
Room Temperature ~ 460 Degree
Heating Mode
Hot Air
Heating Pipe Power
6000W, 2 Sets
Heating Wire Life
100, 000 Hours
Power Demand
380V, 50Hz Three-Phase Four Wires
Power
12.3kw
Overall Machine Weight
25kg
Transport Package
Wooden Case
Specification
604*200*310MM
Trademark
Crown
Origin
China, Kunshan
HS Code
8514109000
Production Capacity
1~3m/Min (Based on Shrink Tube Size)

Product Description

Product description:

Heat Guns for Shrink Wrap

The high power hot air gun is suitable for heating shrinkable tubes and heat shrinable films. It can be installed on the assembly line, and the temperature can be adjusted according to the requirements of the production process. The heat shrinkable time is short and suitable for any length of heat shrinkable tubing.It can work continuously for 24 hours without any interruption, and the power can be adjusted.It is especially suitable for heating Teflon heat shrinkable tubes with high temperature resistance, or large diameter shrinkage tubes and thick wall heat shrinkable tubes.
Model WL1200F-902
Size    Whole machine size See picture
Hot air exit 10~90mm adjustable (square)
Maximum heating width <90mm
Tuyere distance 10mm~120mm tunable
Fan Hair drier 200W
Maximum wind volume 380M3/H air volume adjustable
Temperature  Temp Accuracy Digital adjustment, accuracy of + 1ºC
Temperature Range Room temperature ~ 460ºC
Heating     Heating mode Hot air
Heating pipe power 6000W, 2 sets
Heating wire life 100,000 hours
Power supply Power demand 380V, 50HZ three-phase four wires
Power 12.3KW
Weight 25KG


Features:
  • Single and double-sided heating

  • According to the heating requirements of the heat shrinkable tube, it is free to choose one side or two side heating.

     

  •  

    The width of heating zone and the heating distance can be adjusted.

  • The heating width and the heating distance can be adjusted, which is adjusted by the users themselves to maximize energy conservation and ensure that the line is not hurt.

  •  

    The temperature regulation of the heating machine (room temperature ~460ºC) is precisely controlled by±1ºC

  • The outlet is equipped with a temperature sensor, which can adjust the temperature according to the needs.The precision of temperature control is 1ºC.

  •  

    Term ordering detection function (preventing fan reversal)

  • This machine control system is equipped with motor item ordering sequence detection function.If the item ordering error,the item ordering warning indicator lights up.

  •  

    Fan delay function

  • In order to protect the heating core and prolong the service life of the heating core, the machine has a time delay function of downtime and blow drying. After the machine stops working, the hair dryer will blow off for a minute before it can be shut down.

  •  

    High heat exchange efficiency

  • Ingenious design of wind tunnel let the air uniform through the inside and outside of the helical heating wire.Heat exchange near 100%,the loss of wind pressure is less.The heating core of the heater is designed to use the lower surface power density, and the heating temperature in the unit area is low, so the electric heat wire has a long service life.

  •  

    Air flow regulating valve

  • The air inlet of the blower is equipped with a manual air volume regulating valve, and the air volume can be adjusted according to the needs.

  •  

    Security

  • It has overheating overload protection, power cut protection device, emergency stop switch, phase sequence protection, fully guarantee the safety of the equipment,do not produce exhaust gas, and meet the environmental protection,can keep operating 24 hours a day without stopping all year round.

  • This machine is work in with auxiliary conveyors, and can be applied to heat shrinkable tubes with arbitrary specifications.

  •  

    Selection of assembly auxiliary conveyor


Packing & Shipping & Payment:

For small and light products packed by cartons,for large and heavy products packed by wooden


Heat Guns for Shrink Wrap (WL1200F-902)

Product show:
Heat Guns for Shrink Wrap (WL1200F-902)
Heat Guns for Shrink Wrap (WL1200F-902)

Machine processing wire samples:
Heat Guns for Shrink Wrap (WL1200F-902)
Heat Guns for Shrink Wrap (WL1200F-902)
Heat Guns for Shrink Wrap (WL1200F-902)
Heat Guns for Shrink Wrap (WL1200F-902)
Related products:
Heat Guns for Shrink Wrap (WL1200F-902)
FAQ:

 
1.How to order?
Please contact my Email for much more details, you can place order with us directly
or through alibaba online transcation after confirmation.
2.What's your payment terms?
We accept trade assurance order, T/T,L/C, western union, Paypal etc.
3.How long does the production time?
Generally 3~7 days, if there's customized model or other request will be adjusted.
4.How do you packaged the products?
Small size machine, we will package it in standard neutral carton. Larrge size machine,
we will package it in standard wooden cases.
5.What can you provide for us?

Our service

We provide:

· Best products and factory price. 
· On-time delivery and the shortest delivery time. 
· 1year warranty. If our products cannot function properly within 12 months,
we'll offer spare parts for free and you need to pay for the delivery. 
· OEM and customized service. 
· User manuals will go with relative machines. 
· QC: All products will be checked before delivery. 
· Compensation: If any unqualified product is found, we'll pay the
compensation or send new qualified products to customers
· Maintenance & Repair: In case of any maintenance or repair need,
we'll help to find out the problem and offer relative guidance. 
· Operation Guidance: If you have any problem with operation,
please feel free to contact us. 


Company information:

Heat Guns for Shrink Wrap (WL1200F-902)
Certificate:
Heat Guns for Shrink Wrap (WL1200F-902)

Contact:

Pls contact Suzhou Crown for price inquiry or any other questions/doubt.

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now