• Wire Harness Heating Shrinking Tunnel Oven (WL600B-2F-380)
  • Wire Harness Heating Shrinking Tunnel Oven (WL600B-2F-380)
  • Wire Harness Heating Shrinking Tunnel Oven (WL600B-2F-380)
  • Wire Harness Heating Shrinking Tunnel Oven (WL600B-2F-380)
  • Wire Harness Heating Shrinking Tunnel Oven (WL600B-2F-380)
  • Wire Harness Heating Shrinking Tunnel Oven (WL600B-2F-380)

Wire Harness Heating Shrinking Tunnel Oven (WL600B-2F-380)

Type: Induction Heating Machine
Certification: CE
Structure: Desk Type
Brand: Crown
Model: Wl600b-2f-380
Conveyor (L x W x H): Selective Assembling
Customization:
Diamond Member Since 2020

Suppliers with verified business licenses

Manufacturer/Factory

Basic Info.

Model NO.
WL600B-2F-380
Maximum Wire Harness Diameter
<60mm
Maximum Heating Casing Length
<90mm
Heating Area
400mm
Cooling Zone
200mm
Maximum Transmission Width
550mm
Maximum Transmission Height
<90mm
Texture of Material
Teflon
Speed
1~3m/Min
Transmission of Motor Power
25W (Stepless Speed Regulation)
Heating Mode
Hot Air
Heating Pipe Power
6000W,2 Sets
Power Demand
380V Three Phases Four Wires 50Hz
Power
12.3kw
Transport Package
Wooden Case
Specification
1230x750x450mm
Trademark
Crown
Origin
China, Kunshan
HS Code
8514109000
Production Capacity
1~3m/Min (Based on Shrink Tube Size)

Product Description

Product description:

Wire Harness Heating Shrinking Tunnel Oven

The wire harness insulation sleeve heating shrinking oven is designed for mass production. It can work for 24 hours in a row, and process special products. The heating machine and the conveyer are used together to realize the precise heating of the heat shrinkable tube without damaging the wire. By manually adjusting the speed, the speed of the conveyor belt is kept uniform. The vertical distance and the parallel distance of the heating port to the conveyor belt can be adjusted, and the heat shrinkable tube of different size components can be heated. It is suitable for users with accurate heating requirements for wire harness. It can also be applied to heat high temperature Teflon heat shrinkable tubes or large diameter and long heat shrinkable tubes.
 
Model WL600B-2F-380
Size Conveyor (L x W x H) Selective assembling
Heating machine (L x W x H) See picture
Maximum wire harness diameter <60mm
Maximum heating casing length <90mm
Heating area 400mm
Cooling zone 200mm
Maximum transmission width 550mm
Maximum transmission height <90mm
Conveyor belt Texture of material Teflon
Speed 1~3m/min
The power of the motor 25W (Stepless speed regulation)
Heating  Heating mode Hot air
Heating pipe power 6000W,2 sets
Power supply  Power demand 380V Three phases four wires 50HZ
Power 12.3KW


Features:

One side or double side heating is optional

  • According to the heating requirements of the heat shrinkable tube, it is free to choose one side or two side heating.

  • The heating zone width, heating distance and left and right position can be adjusted.

     

Accurate heating does not hurt the wire

  • The vertical distance and parallel distance of the heating port to the conveyor belt can be adjusted, and the heat shrinkable tube of different size components can be heated,save energy as much as possible and ensure the wire do not be hurt.

 

Heat insulation of heating machine

  • Double insulation, strong machine shell makes the machine safe and reliable, and can work in high temperature for a long time

 

LCD

  • Deviced friendly man-machine interface, menu operation of liquid crystal Chinese characters,simple and convenient manipulation,Real-time display of work status.

 

Open machine presupposition function

  • The machine can set the speed of the fan, the output temperature, the working time, etc.

  • Temperature control system (room temperature ~460 ºC)

  • A digital stepless mediation method is adopted to control the power output, control the temperature, stabilize the output, and control the temperature accuracy by + 2 degrees Celsius.

 

Fan delay function

  • In order to protect the heating core and prolong the service life of the heating core, the machine has a time delay function of downtime and blow drying. After the machine stops working, the hair dryer will blow off for a minute before it can be shut down.

 

High heat exchange efficiency

  • Ingenious design of wind tunnel let the air uniform through the inside and outside of the helical heating wire.Heat exchange near 100%,the loss of wind pressure is less.The heating core of the heater is designed to use the lower surface power density, and the heating temperature in the unit area is low, so the electric heat wire has a long service life.

     

Parameter memory function

  • The power, temperature, fan speed and other parameters of the hot air fan have memory function.

     

Air flow regulating valve

  • The air inlet of the blower is equipped with a manual air volume regulating valve, and the air volume can be adjusted according to the needs.

 

Security

  • It has overheating overload protection, power cut protection device, emergency stop switch, phase sequence protection, fully guarantee the safety of the equipment,do not produce exhaust gas, and meet the environmental protection,can keep operating 24 hours a day without stopping all year round.

 

Selection of assembly auxiliary conveyor

  • This machine is work in with auxiliary conveyors, and can be applied to heat shrinkable tubes with arbitrary specifications.


Packing & Shipping & Payment:

For small and light products packed by cartons,for large and heavy products packed by wooden


Wire Harness Heating Shrinking Tunnel Oven (WL600B-2F-380)

Product show:
Wire Harness Heating Shrinking Tunnel Oven (WL600B-2F-380)
Wire Harness Heating Shrinking Tunnel Oven (WL600B-2F-380)
Wire Harness Heating Shrinking Tunnel Oven (WL600B-2F-380)

Machine processing wire samples:
Wire Harness Heating Shrinking Tunnel Oven (WL600B-2F-380)
Wire Harness Heating Shrinking Tunnel Oven (WL600B-2F-380)
Wire Harness Heating Shrinking Tunnel Oven (WL600B-2F-380)
Wire Harness Heating Shrinking Tunnel Oven (WL600B-2F-380)
Wire Harness Heating Shrinking Tunnel Oven (WL600B-2F-380)
Related products:
Wire Harness Heating Shrinking Tunnel Oven (WL600B-2F-380)

FAQ:

 
1.How to order?
Please contact my Email for much more details, you can place order with us directly
or through alibaba online transcation after confirmation.
2.What's your payment terms?
We accept trade assurance order, T/T,L/C, western union, Paypal etc.
3.How long does the production time?
Generally 3~7 days, if there's customized model or other request will be adjusted.
4.How do you packaged the products?
Small size machine, we will package it in standard neutral carton. Larrge size machine,
we will package it in standard wooden cases.
5.What can you provide for us?

Our service

We provide:

· Best products and factory price. 
· On-time delivery and the shortest delivery time. 
· 1year warranty. If our products cannot function properly within 12 months,
we'll offer spare parts for free and you need to pay for the delivery. 
· OEM and customized service. 
· User manuals will go with relative machines. 
· QC: All products will be checked before delivery. 
· Compensation: If any unqualified product is found, we'll pay the
compensation or send new qualified products to customers
· Maintenance & Repair: In case of any maintenance or repair need,
we'll help to find out the problem and offer relative guidance. 
· Operation Guidance: If you have any problem with operation,
please feel free to contact us. 


Company information:

Wire Harness Heating Shrinking Tunnel Oven (WL600B-2F-380)
Certificate:
Wire Harness Heating Shrinking Tunnel Oven (WL600B-2F-380)

Contact:

Pls contact Suzhou Crown for price inquiry or any other questions/doubt.

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

You Might Also Like

Diamond Member Since 2020

Suppliers with verified business licenses

Manufacturer/Factory
Terms of Payment
LC, T/T, D/P, PayPal, Western Union, Small-amount payment, Money Gram, RMB
International Commercial Terms(Incoterms)
FOB, EXW, CFR, CIF, DAT, FAS, DDP, DAP, CIP, CPT, Others, FCA