• Heat Shrinkable Tubing Shrinking Oven (WL200B-2F-380)
  • Heat Shrinkable Tubing Shrinking Oven (WL200B-2F-380)
  • Heat Shrinkable Tubing Shrinking Oven (WL200B-2F-380)
  • Heat Shrinkable Tubing Shrinking Oven (WL200B-2F-380)
  • Heat Shrinkable Tubing Shrinking Oven (WL200B-2F-380)
  • Heat Shrinkable Tubing Shrinking Oven (WL200B-2F-380)

Heat Shrinkable Tubing Shrinking Oven (WL200B-2F-380)

Type: Induction Heating Machine
Certification: CE
Structure: Desk Type
Brand: Crown
Model: Wl200b-2f-380
Control Power (L×w×h): 200X150X200mm
Customization:
Diamond Member Since 2020

Suppliers with verified business licenses

Manufacturer/Factory

Basic Info.

Model NO.
WL200B-2F-380
Control Power(Lxh)
195 mm*150 mm*140mm
Wire Harness Diameter
20mm
Maximum Heating Length
120mm
Cooling Zone
200mm
Maximum Transmission Width
200mm
Maximum Transmission Height
40mm
Speed
1~3m/Min
Transmission of Motor Power
25W (Stepless Speed Regulation)
Heating Pipe Name
Infrared Tube
Heating Pipe Power
400W, 8 Branches
Power
220V, 3.4kw;
Conveyer Belt Material
Rubber
Motor Power
25W
Transport Package
Wooden Case
Specification
1200*320*260mm
Trademark
Crown
Origin
China, Kunshan
HS Code
8514109000
Production Capacity
1~3m/Min (Based on Shrink Tube Size)

Product Description

Product description:

Heat Shrinkable Tubing Shrinking Oven

WL200B-2F-380 is a conveyor belt heat shrinkable tube heating machine, which is designed for mass production. The heating machine and the conveyer are used together to realize the precise heating of the heat shrinkable tube without damaging the wire. By manually adjusting the speed, the speed of the conveyor belt is kept uniform. The vertical distance and the parallel distance of the heating port to the conveyor belt can be adjusted, and the heat shrinkable tube of different size components can be heated. It is especially suitable for heating high temperature Teflon heat shrinkable tubes or large diameter and long heat shrinkable tubes.
 
Model WL200B-2F-380
Size Conveyor (L x W x H) 1250*320*360mm selective assembling
Heating machine (L x W x H) See picture
Maximum wire harness diameter 20mm
Maximum heating width <90mm
Heating area 400mm
Cooling zone 200mm
Maximum transmission width 250mm
Maximum transmission height <60mm 
Conveyor belt   Texture of material Stainless steel
Speed 1~3m/min
The power of the motor 25W(Stepless speed regulation)
Heating Heating mode Hot air
Heating pipe power 6000W, 2 sets
Power supply for heating machine Power demand 380V three phase four wire 50HZ
Power 12.3KW   


Features:
  • One side or double side heating is optional

  • According to the heating requirements of the heat shrinkable tube, it is free to choose one side or two side heating.

  •  

    The heating zone width, heating distance and left and right position can be adjusted.Accurate heating does not hurt the wire

  • The width of the heating zone and left and right position can be adjusted by the user according to the size of the heat shrinkable tube, save energy as much as possible and ensure the wire do not be hurt.

  •  

    Heat insulation of heating machine

  • Double insulation, strong machine shell makes the machine safe and reliable, and can work in high temperature for a long time.

  •  

    The temperature regulation of the heating machine (room temperature ~460ºC) is precisely controlled by±1ºC

  • The outlet is equipped with a temperature sensor, which can adjust the temperature according to the needs.The precision of temperature control is 1ºC.

  •  

    Term ordering detection function

  • This machine control system is equipped with motor item ordering sequence detection function.If the item ordering error,the item ordering warning indicator lights up.

  •  

    Fan delay function

  • In order to protect the heating core and prolong the service life of the heating core, the machine has a time delay function of downtime and blow drying. After the machine stops working, the hair dryer will blow off for a minute before it can be shut down.

  •  

    High heat exchange efficiency

  • Ingenious design of wind tunnel let the air uniform through the inside and outside of the helical heating wire.Heat exchange near 100%,the loss of wind pressure is less.The heating core of the heater is designed to use the lower surface power density, and the heating temperature in the unit area is low, so the electric heat wire has a long service life.

  •  

    Air flow regulating valve

  • The air inlet of the blower is equipped with a manual air volume regulating valve, and the air volume can be adjusted according to the needs.

  •  

    Security

  • It has overheating overload protection, power cut protection device, emergency stop switch, phase sequence protection, fully guarantee the safety of the equipment,do not produce exhaust gas, and meet the environmental protection,can keep operating 24 hours a day without stopping all year round.

  • This machine is work in with auxiliary conveyors, and can be applied to heat shrinkable tubes with arbitrary specifications.

  •  

    Selection of assembly auxiliary conveyor


Packing & Shipping & Payment:

For small and light products packed by cartons,for large and heavy products packed by wooden


Heat Shrinkable Tubing Shrinking Oven (WL200B-2F-380)

Product show:
Heat Shrinkable Tubing Shrinking Oven (WL200B-2F-380)

Heat Shrinkable Tubing Shrinking Oven (WL200B-2F-380)
Heat Shrinkable Tubing Shrinking Oven (WL200B-2F-380)
Heat Shrinkable Tubing Shrinking Oven (WL200B-2F-380)

Machine processing wire samples:
Heat Shrinkable Tubing Shrinking Oven (WL200B-2F-380)
Heat Shrinkable Tubing Shrinking Oven (WL200B-2F-380)
Heat Shrinkable Tubing Shrinking Oven (WL200B-2F-380)
Heat Shrinkable Tubing Shrinking Oven (WL200B-2F-380)
Related products:
Heat Shrinkable Tubing Shrinking Oven (WL200B-2F-380)

FAQ:

 
1.How to order?
Please contact my Email for much more details, you can place order with us directly
or through alibaba online transcation after confirmation.
2.What's your payment terms?
We accept trade assurance order, T/T,L/C, western union, Paypal etc.
3.How long does the production time?
Generally 3~7 days, if there's customized model or other request will be adjusted.
4.How do you packaged the products?
Small size machine, we will package it in standard neutral carton. Larrge size machine,
we will package it in standard wooden cases.
5.What can you provide for us?

Our service

We provide:

· Best products and factory price. 
· On-time delivery and the shortest delivery time. 
· 1year warranty. If our products cannot function properly within 12 months,
we'll offer spare parts for free and you need to pay for the delivery. 
· OEM and customized service. 
· User manuals will go with relative machines. 
· QC: All products will be checked before delivery. 
· Compensation: If any unqualified product is found, we'll pay the
compensation or send new qualified products to customers
· Maintenance & Repair: In case of any maintenance or repair need,
we'll help to find out the problem and offer relative guidance. 
· Operation Guidance: If you have any problem with operation,
please feel free to contact us. 


Company information:

Heat Shrinkable Tubing Shrinking Oven (WL200B-2F-380)
Certificate:
Heat Shrinkable Tubing Shrinking Oven (WL200B-2F-380)

Contact:

Pls contact Suzhou Crown for price inquiry or any other questions/doubt.

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

You Might Also Like

Diamond Member Since 2020

Suppliers with verified business licenses

Manufacturer/Factory
Terms of Payment
LC, T/T, D/P, PayPal, Western Union, Small-amount payment, Money Gram, RMB
International Commercial Terms(Incoterms)
FOB, EXW, CFR, CIF, DAT, FAS, DDP, DAP, CIP, CPT, Others, FCA